
Boise, ID
Core Drilling in Boise
A 4-inch core through a typical slab runs about $40–$120, and 6- to 12-inch holes $150–$600. Local crews core up to 30 inches across.
- Holes for pipe, conduit and ductwork
- Floors, walls and foundations
- Single holes or a full run of cores
Core drilling prices in Boise
Typical ranges from cost guides, not quotes. A $150–$400 trip minimum is common, so one hole and five holes can cost about the same.
What to have ready
- How many holes, and the diameter of each
- What you are coring through (floor, wall or ceiling) and how thick it is
- Whether the hole lands over open ground, a basement or an occupied floor
- Marked hole locations, or drawings showing them
- Power and water near the work, or how far away they are
Coring rules and scheduling in Boise
A floor core in a slab on grade comes out into soil, and Idaho law counts displacing earth or rock as excavation. When a hole is for a new drain or footing that goes below the slab, put in a Digline request 2 to 10 business days ahead and stay 24 inches from any marked line.
Cores for a new window or door, or anything that widens an existing opening, fall under Boise's building permit list. Coring for a pipe or conduit inside a permitted remodel rides on that project's permit.
Boise coring crews work 7 days a week and take day or night jobs, which helps when holes in an open store or office have to happen after hours. They ask for the location, thickness, hole size and timeline up front.
Core drilling questions
Is one hole worth a service call?
It will usually cost the trip minimum of $150–$400, so group every hole you'll need into one visit.
How big a hole can be cored locally?
Up to 30 inches across with at least one Boise crew.